Forums

callaway 64 deg

• phred952 2,714 Posts

  Thu, Jul 6 2017 7:35 PM

  I admit I haven't used the higher TM ATV wedges, as I bought the 3 Cleveland (56, 60 and 64 degree) wedges as they became available to me.  I found good mapping on the 64* CW for punch shots and use those usually with full backspin for shots from 20 yds to 50 yds.  

  I also use it for flop shots up to 20 yds, and pitches up to 17 yds.  I mapped all 3 wedges in different power and spin settings so I know what they will hit with the ball of my choice.  Full top spin will go about 64 yds.

  Good Luck 

• alosso 21,042 Posts

  Thu, Jul 6 2017 10:05 PM

  64° wedges have been missing from a few sets, notably the Pings. No reason to worry though, as most of the wedges are sharing the same meter speeds.

  Thus it's no problem to mix two or three wedges of different brand or quality (level). Eventually, the longest wedges should be top notch, Cleves, MAX or ATV, while lesser wedges may serve (for a while?) in the shorter range.

  Just make sure to have a good and equal spacing and to start short, from 50 or 60 yds.